Support arm64 hosts in the Windows 11 launcher

Pick qemu-system-aarch64, the AArch64 UEFI firmware and a per-architecture
QEMU config (NVMe disk, virtio-net, ramfb, USB installation media) on arm64,
render the answer file for the target architecture, and move the q35-only
disk and NIC devices out of the shared config. Update vm-images to match
arm64 Windows ISO names.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

qemu/windows11-amd64.ini

@@ -2,3 +2,16 @@
 
 [machine]
   type = "q35"
+
+# The system disk is attached through IDE so that Windows can boot before the
+# VirtIO storage driver is installed; the installation media of
+# --install-from-iso use ide.1 to ide.3.
+[device "system_disk-dev"]
+  driver = "ide-hd"
+  drive = "system_disk"
+  bus = "ide.0"
+  bootindex = "1"
+
+[device "nic0"]
+  driver = "e1000e"
+  netdev = "net0"

qemu/windows11-arm64.ini

@@ -0,0 +1,27 @@
+# arm64 part of the Windows 11 QEMU configuration; read after windows11.ini.
+
+[machine]
+  type = "virt"
+
+# The "virt" machine has no IDE. NVMe and USB mass storage (used by the
+# installation media of --install-from-iso) both have inbox Windows drivers.
+[device "system_disk-dev"]
+  driver = "nvme"
+  drive = "system_disk"
+  serial = "win11disk"
+  bootindex = "1"
+
+# Windows has no inbox driver for virtio-net; the guest tools installed by
+# Configure-Windows.ps1 provide it.
+[device "nic0"]
+  driver = "virtio-net-pci"
+  netdev = "net0"
+
+# Unlike q35, "virt" has no default GPU or keyboard. ramfb is used rather than
+# virtio-gpu because the firmware's virtio-gpu output freezes at the Windows
+# boot manager; Windows drives either one through its basic display driver.
+[device "gpu0"]
+  driver = "ramfb"
+
+[device "kbd0"]
+  driver = "usb-kbd"

qemu/windows11.ini

@@ -1,5 +1,5 @@
 # QEMU configuration for the Windows 11 virtual machine. The machine type is in
-# windows11-amd64.ini, which QEMU reads after this file.
+# windows11-<arch>.ini, which QEMU reads after this file.
 #
 # run-windows11.py fills in the file path placeholders below, writes the result
 # to <state dir>/qemu.ini and passes it to QEMU with -readconfig. Options that
@@ -37,27 +37,15 @@
   format = "raw"
   file = "${uefi_vars}"
 
-# System disk. It is attached through IDE so that Windows can boot before the
-# VirtIO storage driver is installed; the installation media of
-# --install-from-iso use ide.1 to ide.3.
+# System disk image; the device that exposes it (and the NIC, which is
+# attached to the user-mode network "net0" that the launcher defines with
+# -netdev because a config file section cannot hold more than one hostfwd) is in
+# the architecture file.
 [drive "system_disk"]
   if = "none"
   format = "qcow2"
   file = "${disk_image}"
 
-[device "system_disk-dev"]
-  driver = "ide-hd"
-  drive = "system_disk"
-  bus = "ide.0"
-  bootindex = "1"
-
-# The NIC is attached to the user-mode network "net0", which the launcher
-# defines with -netdev because a config file section cannot hold more than one
-# hostfwd (Remote Desktop and SSH are both forwarded to the host).
-[device "nic0"]
-  driver = "e1000e"
-  netdev = "net0"
-
 # Host/guest clipboard integration through the SPICE vdagent channel.
 [device "virtio_serial"]
   driver = "virtio-serial-pci"

run-windows11.py

@@ -67,7 +67,19 @@ rdp_port = env("WIN11_VM_RDP_PORT") or "3389"
 ssh_port = env("WIN11_VM_SSH_PORT") or "2222"
 qemu_config_template = Path(
     env("WIN11_VM_QEMU_CONFIG") or script_dir / "qemu" / "windows11.ini")
-qemu_arch_config = script_dir / "qemu" / "windows11-amd64.ini"
+
+
+def normalize_arch(arch):
+    if arch in ("arm64", "aarch64"):
+        return "arm64"
+    if arch in ("x86_64", "amd64"):
+        return "amd64"
+    die(f"unsupported architecture: {arch}")
+
+
+host_arch = normalize_arch(env("VM_IMAGE_ARCH") or platform.machine())
+qemu_binary = "qemu-system-aarch64" if host_arch == "arm64" else "qemu-system-x86_64"
+qemu_arch_config = script_dir / "qemu" / f"windows11-{host_arch}.ini"
 
 
 def pick_firmware(override, *candidates):
@@ -79,20 +91,36 @@ def pick_firmware(override, *candidates):
     return Path(candidates[0])
 
 
-uefi_code = pick_firmware(
-    env("WIN11_VM_UEFI_CODE"),
-    "/usr/share/OVMF/OVMF_CODE_4M.fd",
-    "/usr/share/edk2/ovmf/OVMF_CODE.fd",
-    "/opt/homebrew/share/qemu/edk2-x86_64-code.fd",
-    "/usr/local/share/qemu/edk2-x86_64-code.fd",
-)
-uefi_vars_template = pick_firmware(
-    env("WIN11_VM_UEFI_VARS"),
-    "/usr/share/OVMF/OVMF_VARS_4M.fd",
-    "/usr/share/edk2/ovmf/OVMF_VARS.fd",
-    "/opt/homebrew/share/qemu/edk2-i386-vars.fd",
-    "/usr/local/share/qemu/edk2-i386-vars.fd",
-)
+if host_arch == "arm64":
+    uefi_code = pick_firmware(
+        env("WIN11_VM_UEFI_CODE"),
+        "/usr/share/AAVMF/AAVMF_CODE.fd",
+        "/usr/share/edk2/aarch64/QEMU_EFI.fd",
+        "/opt/homebrew/share/qemu/edk2-aarch64-code.fd",
+        "/usr/local/share/qemu/edk2-aarch64-code.fd",
+    )
+    uefi_vars_template = pick_firmware(
+        env("WIN11_VM_UEFI_VARS"),
+        "/usr/share/AAVMF/AAVMF_VARS.fd",
+        "/usr/share/edk2/aarch64/vars-template-pflash.raw",
+        "/opt/homebrew/share/qemu/edk2-arm-vars.fd",
+        "/usr/local/share/qemu/edk2-arm-vars.fd",
+    )
+else:
+    uefi_code = pick_firmware(
+        env("WIN11_VM_UEFI_CODE"),
+        "/usr/share/OVMF/OVMF_CODE_4M.fd",
+        "/usr/share/edk2/ovmf/OVMF_CODE.fd",
+        "/opt/homebrew/share/qemu/edk2-x86_64-code.fd",
+        "/usr/local/share/qemu/edk2-x86_64-code.fd",
+    )
+    uefi_vars_template = pick_firmware(
+        env("WIN11_VM_UEFI_VARS"),
+        "/usr/share/OVMF/OVMF_VARS_4M.fd",
+        "/usr/share/edk2/ovmf/OVMF_VARS.fd",
+        "/opt/homebrew/share/qemu/edk2-i386-vars.fd",
+        "/usr/local/share/qemu/edk2-i386-vars.fd",
+    )
 daemonize = False
 install_from_iso = False
 download_only = False
@@ -108,8 +136,8 @@ If the system disk (DIR/disk.qcow2, see --state-dir) is missing, create it from
 the Windows 11 QCOW2 base image.
 The VM hardware (accelerator, memory, CPUs, drives, devices) is defined in
 qemu/windows11.ini, which is rendered to qemu.ini in the state directory and
-loaded with QEMU's -readconfig, followed by qemu/windows11-amd64.ini. Later QEMU
-arguments override them, e.g. -- -m 4G -smp 4.
+loaded with QEMU's -readconfig, followed by qemu/windows11-<arch>.ini (amd64 or arm64, chosen from the host
+architecture or VM_IMAGE_ARCH). Later QEMU arguments override them, e.g. -- -m 4G -smp 4.
 Use --install-from-iso to perform an automatic ISO installation instead.
 If it exists, start Windows normally without attaching installation media.
 
@@ -226,8 +254,8 @@ if not disk_image.is_file():
         base_image = Path(env("WIN11_VM_BASE_IMAGE")
                           or capture([str(image_downloader), "--print-path", "windows11"]))
 
-if shutil.which("qemu-system-x86_64") is None:
-    die("qemu-system-x86_64 is not installed.")
+if shutil.which(qemu_binary) is None:
+    die(f"{qemu_binary} is not installed.")
 if installing:
     if shutil.which("qemu-img") is None:
         die("qemu-img is not installed.")
@@ -259,7 +287,7 @@ if installing_from_iso:
         return source.exists() and source.stat().st_mtime > seed_iso.stat().st_mtime
 
     if not seed_iso.is_file() or any(newer_than_seed(s) for s in seed_sources):
-        run([str(script_dir / "seediso" / "windows11" / "build-seed.sh"), str(seed_iso)])
+        run([str(script_dir / "seediso" / "windows11" / "build-seed.sh"), str(seed_iso), host_arch])
 
 if pid_file.is_file():
     old_pid = pid_file.read_text().strip()
@@ -336,14 +364,19 @@ qemu_args = [
     # "-display", "none", "-spice", "port=5900,addr=127.0.0.1,disable-ticketing=on,agent-mouse=off", "-device", "virtio-vga",
 ]
 if installing_from_iso:
-    qemu_args += [
-        "-drive", f"file={install_iso},if=none,id=install_media,media=cdrom,readonly=on",
-        "-device", "ide-cd,drive=install_media,bus=ide.1,bootindex=2",
-        "-drive", f"file={seed_iso},if=none,id=answer_media,media=cdrom,readonly=on",
-        "-device", "ide-cd,drive=answer_media,bus=ide.2,bootindex=3",
-        "-drive", f"file={tools_iso},if=none,id=tools_media,media=cdrom,readonly=on",
-        "-device", "ide-cd,drive=tools_media,bus=ide.3,bootindex=4",
-    ]
+    # q35 has IDE for the installation media; "virt" does not, so use USB.
+    for media_id, media_file, boot_index, ide_bus in (
+            ("install_media", install_iso, 2, "ide.1"),
+            ("answer_media", seed_iso, 3, "ide.2"),
+            ("tools_media", tools_iso, 4, "ide.3")):
+        device = (f"ide-cd,drive={media_id},bus={ide_bus},bootindex={boot_index}"
+                  if host_arch == "amd64"
+                  else f"usb-storage,drive={media_id},bootindex={boot_index}")
+        qemu_args += [
+            "-drive", f"file={media_file},if=none,id={media_id},media=cdrom,readonly=on",
+            "-device", device,
+        ]
+
 if installing_from_iso:
     print("Starting Windows 11 automatic installation.")
 elif installing:
@@ -357,7 +390,7 @@ print("Account: guofang / password; " + "; ".join(
 if daemonize:
     log_file.write_text("")
     qemu_args += ["-serial", f"file:{log_file}", "-daemonize", "-pidfile", str(pid_file)]
-    run(["qemu-system-x86_64", *qemu_args, *extra_args])
+    run([qemu_binary, *qemu_args, *extra_args])
     print(f"VM started (PID {pid_file.read_text().strip()}); console log: {log_file}")
 else:
-    os.execvp("qemu-system-x86_64", ["qemu-system-x86_64", *qemu_args, *extra_args])
+    os.execvp(qemu_binary, [qemu_binary, *qemu_args, *extra_args])

seediso/windows11/build-seed.sh

@@ -3,8 +3,22 @@ set -euo pipefail
 
 script_dir="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)"
 output="${1:-${script_dir}/seed.iso}"
+arch="${2:-${VM_IMAGE_ARCH:-$(uname -m)}}"
+case "$arch" in
+  arm64|aarch64) answer_arch=arm64 ;;
+  x86_64|amd64) answer_arch=amd64 ;;
+  *) printf 'Error: unsupported architecture: %s\n' "$arch" >&2; exit 1 ;;
+esac
+
+# The answer file's components name the processor architecture, so render a
+# copy for the target architecture.
+work_dir="$(mktemp -d)"
+trap 'rm -rf "$work_dir"' EXIT
+sed "s/processorArchitecture=\"amd64\"/processorArchitecture=\"${answer_arch}\"/" \
+  "$script_dir/Autounattend.xml" >"$work_dir/Autounattend.xml"
+
 seed_files=(
-  "$script_dir/Autounattend.xml"
+  "$work_dir/Autounattend.xml"
   "$script_dir/Configure-Windows.ps1"
 )
 # Numbered installer scripts (10-Install-Git.bat, 20-..., in install order).